MirOS Manual: iy(4)

IY(4)                   BSD Programmer's Manual (i386)                   IY(4)


     iy - Intel i82595 Ethernet driver


     iy0 at isa? port 0x360 irq 7


     The iy device driver supports the Ether-Express PRO/10 card, and might
     support other ISA cards using the same chip.

     Other models of Intel network cards are supported by the fxp(4) and ie(4)

     Various models of these cards come with a different assortment of connec-

          Standard 15 pin connector

          BNC, also known as thin-net

          UTP, also known as twisted pair

     The default port to use is the port the card autodetects at ifconfig up
     time. To choose an alternative port, use the following flag combinations
     with ifconfig(8) or in the appropriate hostname.if(5) file.

     -link0 -link1
          Use the autodetected port (default).

     -link0  link1
          Use the BNC port.

      link0 -link1
          Use the AUI port.

      link0  link1
          Use the UTP port.


     The EtherExpress PRO card has no jumpers to set the address. Intel sup-
     plies software to set the address of the card in software. You have to
     hardwire this address in your kernel configuration file.


     arp(4), fxp(4), ie(4), ifmedia(4), intro(4), isa(4), netintro(4),
     hostname.if(5), ifconfig(8)

MirOS BSD #10-current            May 22, 1996                                1

Generated on 2017-04-03 16:26:17 by $MirOS: src/scripts/roff2htm,v 1.88 2017/01/29 00:51:06 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002–2017 The MirOS Project, Germany.
This product includes material provided by mirabilos.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.