MirBSD manpage: stge(4)

STGE(4)                    BSD Programmer's Manual                     STGE(4)


     stge - Sundance/Tamarack TC9021 Gigabit Ethernet driver


     stge* at pci? dev ? function ?

     Configuration of PHYs or Ten-bit interfaces may also be necessary. See


     The stge device driver supports the Sundance/Tamarack TC9021 Gigabit Eth-
     ernet chip.

     The Sundance/Tamarack TC9021 is found on the D-Link DGE-550T, and the An-
     tares Microsystems Gigabit Ethernet board. It uses an external PHY or an
     external 10-bit interface.


     arp(4), eephy(4), ifmedia(4), intro(4), mii(4), netintro(4), pci(4),
     vlan(4), hostname.if(5), ifconfig(8)


     The stge driver first appeared in OpenBSD 3.1.


     The stge driver was written by Jason R. Thorpe <thorpej@netbsd.org>.


     The stge driver does not support the VLAN tag insertion/removal feature
     of the TC9021 chip. This is primarily because the TC9021's VLAN do not
     have a useful programming interface.

     The stge driver does not yet support jumbo Ethernet frames.

MirBSD #10-current              July 24, 2001                                1

Generated on 2021-12-07 11:07:08 by $MirOS: src/scripts/roff2htm,v 1.103 2021/01/23 20:24:35 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2021 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.